When To Choose PU Mould Release Agents?

Posted by Admin on July, 22, 2021

Polyurethanes are basically polymers that consist of organic units that are joined by carbamate links. They are known for having brilliant bonding properties with a number of materials. But this property is not considered favourable when it comes to moulding of bodies that are made of foam. When moulded PU or polyurethane foam is produced, it casts RIM or Reaction injection moulding and polyurethane elastomers. At such a situation the PU mould release agent is needed to remove the product from the mould very smoothly. The Polyurethane mould release agent is applied on the surface of the polyurethane product, to enable mould to be detached from the product by creating a barrier. The PU mould release agent does not have any kind of impact on product or tool on which it has been applied .Some common applications of these release agents include casting electronics, protecting tools or fixtures. Customers can contact any PU release agent in Mumbai and use their product for :
• Foam dashboards
• Shoe soles
• Rigid foam
• Soft foam
• Cable guards
• Insulation
• Golf carts
• Foam seats
• Drive belts
• High load wheels
• Skate wheels
• Automotive and recreational setting
• Isocyanate bound products
• Polyurethane toys
• Styling kits for bodies of cars
• Cushioning equipment
• Thermoplastic coatings

Companies which act as PU mould release agent supplier are known for chemically engineering and developing a film which is heat stable and non-carbonized. This helps to wet the surface of the mould evenly to ensure that the manufacturing rounds are lasting for long durations without having any kind of impact on the skin of urethane.

What would happen if release agents are not used?

• Product gets damaged: If a product gets attached to mould it might cause permanent damage to the product during the removal process. In some cases the removal of the mould from the product becomes so difficult that the product eventually needs to be discarded by the user.

• Profit lost: With every situation where mould release agent is not used, damage is caused to the product. The company eventually ends up losing their time, money and raw materials to remove the attached mould.
• The production process gets slow : Workers have to put in a lot of time and labour for the clean-up process if the product gets attached to mould. This automatically leads to interruptions in the process of production.

Any PU mould release agent manufacturer in India can help customers with a product of certain characteristics as per their needs. The different types of Polyurethane mould release agents are given as follows:
• Liquid mould release agent
• Non-silicone mould release in spray form
• Ethylene propylene diene monomer or EPDM release agent
• Polytetrafluoroethylene or PTFE mould release spray
• Water-based PU shoes release agent
• Oil-based PU shoes release agent
• PU soft foam release agent
• Water based mould release agent for polyurethane rigid foam

Some options for using the polyurethane moulders are :
• Concentrated or ready to use
• Water or solvent based
• No flammable options
• Volatile organic compound or VOC free options
• Aerosol

This entry was posted on July, 22, 2021 at 10 : 21 am and is filed under PU Mould Release Agent. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response from your own site.

Leave a Comment

(required) (will not be published)

Raise your Query

Hi! Simply click below and type your query.

Our experts will reply you very soon.

WhatsApp Us